The PLA60 offers a single solution for displays up to 95" in a wide range of installations including lobbies, hotel rooms, boardrooms, public displays or home theaters. Its all-steel construction enables it to hold screens up to 175lb, while its self-lubricating bushings enable the arms to smoothly articulate and position your display for optimal viewing. Combined with adjustable tilt and pivot capabilities, the PLA60 is the only wall arm you need.

• Articulating
• Adjustable Tilt
• Pivot
• Cable Management
• Vertical Adjustment
• 180° Swivel
• Extendable Arm

• PLA Series Articulating Wall Arm For 37" to 95" Displays*
• 1 x Wall plate
• 1 x Tilt-roll assembly
• 1 x Arm assembly
• 1 x Wall support arm axle
• 3 x Vinyl trim
• 8 x (M10 x 1.5 x 15mm) screw bolt
• 1 x (.505 x .75 x .062") Nylon washer
• 1 x Tilt adjustment knob
• 1 x Carriage bolt (3/8"-16 x 3.25")
• 2 x (1.525 x 2 x .062") Delrin washer
• 1 x (#8-32 x .375") Socket cap screw
• 8 x Plastic finishing cap
• 1 x Holding pin
• 1 x Retainer plug
• 8 x (5/16 x 3") Wood screw
• 8 x (.250 x 1 x .068") Washer
• 1 x 9/64" Allen wrench
• 4 x Cable management clips
• 4 x Cable tie
• 1 x 36" Polyester mesh sleeve
• 1 x 6 mm Allen wrench
• 1 x 10 mm Allen wrench
• 8 x Anchor
• 1 x Adapter bracket
• 2 x Shallow adapter bracket
• 2 x Deep adapter bracket
• 1 x Allen wrench

37"- 60" Plasma and LCD Screens