Reduce costs by using existing network cable to provide both power and data

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices.

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.

• 120 V AC
• 230 V AC

• 1-Port Gigabit High-Power PoE+ Injector
• Power Cable
• Installation Material (2 Screws and Drywall Anchors)
• Instructions

Protections:

• Short Circuit
• Overload
• High-voltage

• Intellinet Wireless 300N Access Points
• Intellinet Bridges
• VoIP Telephones

Intellinet Network Cameras:

• NBCC30-IR
• NFC30-IR
• NFC30
• NFD30
• NFC31
• NFC31-IR
• NFD130-IR
• NFD130-IRV

• FCC Class B Part 15
• CE 89/336/EEC

Compliant:

• IEEE 802.3af
• IEEE 802.3at
• IEEE 802.3
• IEEE 802.3ab
• IEEE 802.3u