Eaton EMPDT1H1C2 Environmental Monitoring Probe

Part No. EMPDT1H1C2

by Eaton Corporation

Eaton EMPDT1H1C2 Environmental Monitoring Probe

Part No. EMPDT1H1C2

by Eaton Corporation

$444.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberEMPDT1H1C2
Brand NameEaton
Product ModelEMPDT1H1C2
Product NameEMPDT1H1C2 Environmental Monitoring Probe
Marketing Information

Monitors Temperature, Humidity and Other Environmental Data Remotely 24/7

The EMPDT1H1C2 Environmental Monitoring Probe (EMP) Gen 2 enables you to collect temperature and humidity readings in rack enclosures and monitor environmental data remotely using SNMP or a web browser. It features one temperature, one humidity and two dry-contact status data points. Compatible with select Eaton UPS systems and PDUs, the EMP Gen 2 features a translucent case and integrated LED that lets you identify the status of each sensor at a glance while walking the aisles.

Monitor Status of Up to 6 Contact Devices or Sensors

In addition to measuring ambient temperature and humidity at the rack, the EMP Gen 2 can support up to two additional input contact sensor devices per module. Since you can daisy-chain up to three EMPDT1H1C2 probes per host device, you can connect up to six total devices, such as water leak detectors, door contact sensors, vibration sensors and smoke detectors. Receive real-time status of all sensors via SNMP or browser and notifications of alarms via email. You can also create customizable shutdown and load-shedding protocols in case of extended power failures.

Allows Great Flexibility and Speed in Installation

You can install the EMPDT1H1C2 almost anywhere on a rack or on the wall near the rack. It features nylon fastener locations, magnets, cable tie slots and keyhole slots for easy mounting wherever and however the EMP Gen 2 is most needed. For optimum air intake measurement within an enclosure, the EMP Gen 2 provides tie wrap mounting options for front and rear door perforation to specifically measure air flow at the intake point. This enhances the richness of rack-level environmental data for the top, middle and bottom of the rack.

Packaged Quantity1
Product TypeEnvironmental Monitoring Probe
Physical Characteristics
Color FamilyOther
Product ColorTranslucent
Height1.15" (29.30 mm)
Width1.48" (37.60 mm)
Weight (Approximate)1.20 oz (34 g)
Miscellaneous
CompatibilityEaton Devices:
  • 10/100Mb ConectUPS-X
  • ConnectUPS-BD
  • ConnectUPS-E with RW V3.01 and higher
Country of OriginPhilippines
ConditionNo
UPC0743172091604
Warranty
Limited Warranty2 Year
general purpose ups (33)
$13633.99
$10640.99
$18659.99
industrial ups (12)

Part No. 9PXM8S12K

Eaton 9PXM UPS - Rack/Tower - 6 Minute Stand-by - 230 V AC Input

MODS 6 BAT MOD NMC HW

$24322.99

Part No. 9PXM8S16K

Eaton 9PXM UPS - Rack/Tower - 6 Minute Stand-by - 230 V AC Input

MODS 8 BAT MOD NMC HW

$29423.99
$30736.99
$31257.99
$11580.99
$25116.99
$12730.99
pdus (2)
power modules (1)

Part No. 9PX11KPM

Eaton 9PX11KPM 11 kVA 3U UPS Power Module

POWER MODULE

$10107.99
remote management adapters (2)

Part No. NETWORK-M2

Eaton Gigabit Network Card - Multicolor