HPE SN6610C 8-port 16/32Gb SFP+ DCNM SAN Insights Switch

Part No. R7L02A

by Hewlett Packard Enterprise

$22652.99

HPE SN6610C 8-port 16/32Gb SFP+ DCNM SAN Insights Switch

8 Ports - 32 Gbit/s - 8 Fiber Channel Ports - 8 x Total Expansion Slots - Rack-mountable - 1U - Redundant Power Supply

Part No. R7L02A

by Hewlett Packard Enterprise

$22652.99
General Information
ManufacturerHewlett Packard Enterprise
Manufacturer Part NumberR7L02A
Brand NameHPE
Product SeriesC
Product ModelSN6610C
Product NameSN6610C 8-port 16/32Gb SFP+ DCNM SAN Insights Switch
Marketing Information

Key Features

High Performance for All-flash Arrays and Virtualized Workloads

The C-series SN6610C Fibre Channel Switch provides consistent 32 Gbps low-latency performance across every FC port on the switch.

Delivers increased performance with an aggregate bandwidth of 1024 Gbps for growing and dynamic workloads.

Delivers the same outstanding availability and reliability as previous generation HPE C-series SN6010C Fibre Channel Switch by providing optional redundancy on all major components such as power supplies and fans.

Provides visibility into each virtual machine logged into the fabric through HBAs capable of priority tagging the Virtual Machine Identifier (VMID) on every FC frame.

On-board hardware that protects the entire system from malicious attacks by limiting access to critical components such as the bootloader, system image loader and Joint Test Action Group (JTAG) interface.

Investment Protection

The HPE C-series SN6610C Fibre Channel Switch provides an option to deploy as few as eight 32 Gbps Fibre Channel (FC) ports which can grow from 8 ports to 16 ports, and thereafter with a port expansion module. Expanding up to a maximum of 32 ports.

Configurable with 16 Gb FC SFP+ or 32 Gb FC SFP+ optics to accommodate your budget while being fully prepared for tomorrow.

Lower initial investment and power consumption for entry-level configurations of up to 8 ports compared to a fully loaded 32-port switch.

Intelligent Network Services for Modern SAN

The HPE C-series SN6610C Fibre Channel Switch supports slow-drain detection and isolation, VSAN technology, access control lists for hardware-based intelligent frame processing, smart zoning, and other various services.

Includes VSAN technology provides a cost-effective way to consolidate resources while providing high resiliency to potential fabric disruptions.

Provides powerful Representational State Transfer (REST) and NX-API capabilities to enable flexible and rapid programming of utilities for the SAN.

Easy Manageability

The HPE C-series SN6610C Fibre Channel Switch provides intelligent diagnostics tools such as inter-switch link diagnostics, read diagnostic parameters, protocol decoding, network analysis tools, and others for improved reliability, faster problem resolution, and reduced service costs.

Consolidate separate physical SAN fabrics into one large fabric for ease of management and reduced total cost of ownership.

Cisco Data Center Network Manager (Essentials Edition) software, included with switch, provides a centralized management tool with task-based wizards. Additional advanced features are available with the DCNM licensed version, sold separately.

HPE C-series SAN Insights (Cisco SAN Analytics) delivers deep visibility into I/O traffic between the compute and the storage infrastructure. This information is in addition to the already-available visibility obtained from individual ports, switches, servers, virtual machines, and storage arrays.

Product TypeFibre Channel Switch
Interfaces/Ports
Total Number of Ports8
Number of Fibre Channel Ports8
Media & Performance
Data Transfer Rate32 Gbit/s
I/O Expansions
Total Number of Expansion Slots8
Expansion Slot TypeSFP+
Power Description
Redundant Power SupplyYes
Physical Characteristics
Compatible Rack Unit1U
Form FactorRack-mountable
Height1.72" (43.69 mm)
Width17.30" (439.42 mm)
Depth20.11" (510.79 mm)
connector cables (13)

Part No. AJ834A

HP OM3 Fiber Channel Cable - LC Male - LC Male - 1m

CABLE PL 1Y

Part No. AJ833A

HP OM3 Fiber Channel Cable - LC Male - LC Male - 0.5m

CABLE PL 1Y

Part No. AJ838A

HP OM3 Fiber Channel Cable - LC Male - LC Male - 30m

FIBER OPTIC CABLE PL 1Y

Part No. AJ837A

HP OM3 Fiber Channel Cable - LC Male - LC Male - 15m

CABLE PL 1Y

Part No. AJ839A

HP OM3 Fiber Channel Cable - LC Male - LC Male - 50m

LC/LC 8GB FC 10GBE CABL PL 1Y

Part No. QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 5m Cable - 16.4 ft (5 m) Fiber Optic Network Cable for Network Device, Switch, Router - First End: LC Network - Male - Second End: LC Network - Male - Black

Fiber Cable - Fiber Optic - Male Left Gender - Male Right Gender - LC Right Connector - LC Left Connector - 5M Length - Multimode Fiber

fan trays (1)

Part No. Q9D38A

HPE StoreFabric SN6610C Fan Tray

hardware licensing (1)
$11204.99
miscellaneous kits (1)

Part No. Q2F25A

HPE StoreFabric SN2100M Rack Installation Kit

PL 4R

modules (5)
$24963.99
$15524.99
power cords (10)

Part No. AF556A

HP Standard Power Cord - 1.83m

PL SH

Part No. AF570A

HPE Standard Power Cord - 6 ft Cord Length

PL SH

Part No. AF558A

HPE Standard Power Cord - 8.2 ft Cord Length

2.5M 10A C13-ARGENTINA PWR CRD

Part No. AF565A

HPE Standard Power Cord - 6 ft Cord Length

HP 1.83M 10A C13 CH POWER CORD

power modules (1)
software licensing (3)

Part No. R4F89AAE

HPE Data Center Network Manager - License - 1 License - Available via Electronic

SN6000C DCNM SWITCH E-LTU

$20785.99
$18428.99

Part No. A7515AAE

HPE StoreFabric Enterprise Package - License - 1 Switch - Available via Electronic

HPE SN6000C Enterprise Package E-LTU

$11718.99