The FI-3000 FiberInspector™ Ultra is the industry's most complete fiber inspection solution. It's the only inspection camera that supports single fiber or MPO; automated or instant manual inspection and works with the Versiv™ Cabling Certification System, LinkWare™ or your smartphone. Get an instant view of the fiber endface using the Live View feature. Then use the simple gesture-based interface to zoom in fiber or perform an optional automated PASS/FAIL analysis in seconds. Its rugged, ergonomic design makes it comfortable even when inspecting hundreds of bulkheads and cables. Choose from two user interface and reporting methods. First, the iOS/Android app allows you to inspect your MPO installation using your phone and easily share your inspection results via text or even social media. Second, pair the FiberInspector with Versiv™ Cabling Certification System using its user interface and industry-leading LinkWare™ reportingsystem. With Versiv and LinkWare you can test copper, fiber loss, OTDR and inspection and combine the results into one complete report.

The FiberInspector™ Ultra is available in two models:

• FI-3000 FiberInspector™ Ultra - works with both the Versiv™ Cabling Certification System and mobile devices.
• FI2-7300 FiberInspector™ Ultra Kit - includes the FI-3000 camera and Versiv 2 mainframe.

Eliminate the #1 Cause of Fiber Failure

Endface contamination the leading cause of fiber failures. Dirt and debris cause insertion loss and reflections that inhibit optical transmission and cause havoc with transceivers. Fiber loss and OTDR testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate.

Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one end-face to another upon mating, both sides of any connection must always be cleaned and inspected. Further, mating contaminated connectors can cause permanent damage as microscopic debris is crushed between end-faces in physical contact. Even factory terminated patch cords or pigtails must be inspected as protective caps do not keep end-faces clean. Avoiding this common cause of failure starts with inspecting the end-face and eliminating any contamination before insertion into a bulkhead or piece of equipment. Inspection is critical for MPO based fiber installations as dirt and other debris can be easily moved from one fiber end face to another.

Grab the Most Complete, Efficient Inspection Solution

The FI-3000 FiberInspector™ Ultra offers an extensive feature set that makes testing MPO trunks, cassettes, array cables or single fibers easy and efficient. The multiple camera design with autofocus provides a Live View of the entire endface on your Versiv or smartphone instantly - then use simple touchscreen gestures to get a detailed view of endfaces in real time. Touch "TEST", and in seconds, you'll get an automated PASS/FAIL result compliant with IEC 61300-3-35. Use the industry-leading LinkWare platform to store complete project reports including copper, fiber loss, OTDR and endface images or store results on your phone and share them through text messages or email. The compact, ergonomic design with autofocus makes it comfortable and fast even when you're testing hundreds of cable or ports.

• Fiber Fault Detection
• Fiber Optic Cable Testing

• 120 V AC
• 230 V AC

• FiberInspector FI2-7300 Fiber Inspection Scope Camera
• Versiv Mainframe
• FI-3000 MPO/Single Fiber Camera
• Holster
• USB-USB C Cable (To Connect the Probe to the Mainframe)
• Tip Set (12/24 UPC and 12/24 APC)
• Single Fiber Adapter for FI-1000 Tips
• Blank Module (To Protect the Mainframe's Rear Connector)
• AC Charger
• Shoulder Strap
• USB Interface Cable
• Versiv Open Source Software CD
• Integrated Wi-Fi
• Getting Started Guide
• Soft Carrying Case

• Optical Fiber
• Network
• Data Center

• IEC 61300-3-35 ED. 2 MM IEC 61300-3-35 ED. 2 SM APC
• IEC 61326-1
• IEC 61326-2-1
• CISPR 11
• Class A USA (FCC)
• 47 CFR 15
• part 15 FCC
• IEC 61010-1