Black Box T1/E1 Multiplexor with Fiber Extender - Multimode, 5-Km, Dual SC, 4-Port

Part No. MT1405A-MM-SC

by Black Box Corporation

Black Box T1/E1 Multiplexor with Fiber Extender - Multimode, 5-Km, Dual SC, 4-Port

4 Data Channels - Optical Fiber, Twisted Pair

Part No. MT1405A-MM-SC

by Black Box Corporation

$2156.99
General Information
ManufacturerBlack Box Corporation
Manufacturer Part NumberMT1405A-MM-SC
Brand NameBlack Box
Product NameT1/E1 Multiplexor with Fiber Extender - Multimode, 5-Km, Dual SC, 4-Port
Marketing Information
  • Ideal for extending T1 connections over fiber to remote PBX equipment.
  • Local loopback on both the copper and fiber ports.
  • It also offers remote fiber loopback and circuit test modes.
  • Configurable alarm relay contacts enable you to set up audio/visual fault notification.

Get extra distance for your T1 or E1 communications with a pair of T1/E1 to Fiber Muxes. Unlike ordinary fiber-based T1 extenders, the four-port muxes eliminate the requirement that each channel has its own fiber link.

In a typical enterprise application, these unmanaged muxes use optical media to aggregate and extend four T1 or E1 channels from a local PBX to four T1/E1 connections at a remote PBX.

Use them also for mobile backhaul applications where you want a cost-effective, multiservice platform that's capable of delivering TDM services over a fiber link. Extend four T1 lines from your TDM network to a cell site, for instance.

With fiber optics, your T1 or E1 communications also receive the benefits of security, immunity against EMI and RFI, and protection against the harmful effects of ground loops.

The T1/E1 to Fiber Muxes offer simple installation and use. DIP switches are used to configure the units for T1/E1 line operation and enabling port alarm relays. For troubleshooting, the T1/E1 to Fiber Mux offers local loopback on both the copper and fiber ports, as well as remote fiber loopback and circuit test pattern modes - minimizing the need for testing functions at both ends of the link.

Single-mode versions of the T1/E1 to Fiber Mux are also available, as well as both multimode and single-mode models with an integrated copper Ethernet LAN connection.

Product TypeData Multiplexer
Interfaces/Ports
Number of RJ-48 Ports4
Number of SC Ports1
SC Port TypeDuplex
Number of Data Channels4
Media & Performance
Connectivity TechnologyWired
Media Type Supported
  • Optical Fiber
  • Twisted Pair
Network Technology SupportedT1/E1
Fiber Mode SupportedMulti-mode
Maximum Distance Supported5 km
Physical Characteristics
Height1.90" (48.26 mm)
Width6.70" (170.18 mm)
Depth5.50" (139.70 mm)
Weight (Approximate)1.13 kg
Miscellaneous
Additional Information
  • Indicators LEDs: Power, Test, RJ-48 Link, Fiber Optic Link
  • MTBF 150,000 hours
  • Power 100-240 VAC, 50-60 Hz, autosensing
  • Protocol ANSI: T1.403, T1.102; AT&T: T62411; ITU: G.703, G.704, G.706, G.736, G.775, G.823, G.824, G.8261; ETSI: ETS 300 166
This Product Works With:
  • G.703 75-120 ohm Balun 2.048 Mbps, Female
  • G.703 75-120 Adapter (MT256A-F)
  • T1 Cable (ETNMR01, ETNMRS01)
Country of OriginUnited States
TAA CompliantYes
Environmentally FriendlyYes
Environmental Compliance
  • Restriction of Hazardous Substances (RoHS)
  • Waste Electrical and Electronic Equipment Directive (WEEE)
ConditionNo
UPC822088111818
Warranty
Limited Warranty2 Year
connector cables (1)
signal splitters/amplifiers (1)

Part No. MT256A-F

Black Box G.703 Balun - 75-120 ohm, 2.048 Mbps, Female - TAA Compliant

BLACK BOX CORP G 703 75-102 OHM BALUN 2.048 MBPS