The ACM7000-L Resilience Gateway ensures uptime at branch offices, retail stores, kiosks and other remote sites. Cellular access provides an always-on gateway to your off-site network devices, even when the primary network is down.

Identify and remediate issues at the network edge before they become failures with Smart OOB™. Maximize WAN resilience with Failover to Cellular™ to 4G LTE networks and built-in multicarrier capabilities.

• 4-8 serial ports, out-of-band management of network and server devices
• 4 x USB 2.0 console ports, out-of-band management of network and server devices
• Smart OOB extends beyond traditional out-of-band management
• Failover to Cellular™ and IP Passthrough for out-of-band access and failover network connectivity over cellular.
• Integrated RESTful API engine on devices running firmware 4.0 or higher
• Manage all edge routers, firewalls, UPSes, PDUs with serial & USB & Ethernet consoles
• Centralize the management of all your enterprise remote sites and data centers with Lighthouse 5
• Automatically detect and recover from outages and repair equipment faults
• Link Layer Discovery Protocol (LLDP) discover, identify and verify attached devices on your local network.
• Log audit trails to embedded 4GB local storage for troubleshooting and compliance
• Strong security, PCI DSS 3.2, FIPS140-2, SSL and SSH, stateful firewall, OpenVPN & IPsec
• Embedded internal temperature sensor
• Environmental and physical sensor alarm notification via SMS, SNMP or email

• Rack Mount
• Desktop
• Rail-mountable

• ACM7000-L Resilience Gateway
• Rack Mount Kit - Ear and Screw (Part# 590003)
• 1 x Digital I/O Black Terminal Block (Part# 319115)
• DB9F-RJ45 Straight Adapter (Part# 319015)
• 4 x Rubber Feet (Part# 370003)
• 12VDC Universal Power Supply (Part# 450031)
• 2 x 4G Cellular Blade Antennas
• 1 x ACM7000-L Antenna Extension Kit (Part# 590051) (-L variants only)
• Quick Start Guide

• 4 serial Cisco Straight pinout, ext power, 1 GbE Ethernet or fiber SFP & 4 port GbE switch, Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports

Models & Connectors:

• All serial ports are RJ45 RS-232 (50 to 230,400bps, Cisco pinout)
• 2 x RJ45 10/100/1000 Ethernet ports, primary and failover
• 4 x USB 2.0 console port
• 2 x TTL level Digital I/O ports (DIO) 5V DC max @ 20mA (supports external water /smoke / motion dry contact sensors)
• 2 x High Voltage Digital Outputs (HVDO) 5-30V DC@ 100mA (drives relays, alarms, etc.)
• 110-240V AC to 12V DC external power adapter
• 11.5 W total consumption

• Humidity: 5% to 90%
• Ambient operating temperature: -25°C to 60°C (-13°F to 140°F)
• Non-operating storage temp: -40°C to 75°C (-40°F to 167°F)

Emissions: EN 55022:2010, CISPR 22:2008, FCC Part 15 Subpart B:2015, ICES-003 Issue 5 (2014), AS/NZS CISPR 22:2009+A1:2010, EN 61000-3-2:2006/A2:2009, EN 61000-3-3:2008

Immunity: EN 55024:2010, CISPR 24:2010, EN 61000-4-2:2009, EN 61000-4-3:2006+A2:2010, EN 61000-4-4:2004+A1:2010, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-8:2010, EN 61000-4-11:2004

Isolation:

• Serial Port: 4kV ESD protection on RS-232 transceivers
• Ethernet Port: 1500V AC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

Other Agency Approvals: CE, UL 1950, TUV, C-Tick, Security features to support PCI DSS 3.2 compliance, NERC CIP standards, FIPS 140-2 validated module Certificate #2473

Memory & CPU:

• 800 MHz Armada 370 ARMv7 SoC (Marvell 88F6W11)
• 256MB DDR3 SDRAM, 32MB Embedded Flash and 4GB Internal NAND Flash

MTBF: AC-DC (12V) adapter - 100,000 hours

Operating System: Linux with source code access and Custom Development Kit (CDK)

Security & Authentication: IPsec & OpenVPN, SSL tunnels, Secure Shell (SSH V2), TACACS+, Kerberos, RADIUS and LDAP authentication, PAP/CHAP authentication (dial up), Dial back support, Local authentication, System event syslog, Authenticated NTP

Gateway Router: Stateful firewall, DHCP server, DDNS, Port forwarding, IP filtering with access control lists

Remote Management: HTTPS & SSH console, Nagios NSCA & NRPE, SNMP, TFTP & FTP server, Password access control, IP service port control, AJAX web terminal, Auto Response, RESTful APIs

Cellular Specifications for: ACM7000-L

• SIM Slot: Dual Push Click 2FF SIM slots
• Modem Device: These models utilize the Sierra Wireless EM7565. This a global cellular module ceritfied CE, FCC, GCF, IC, JRF/JPA, NCC, PTCRB
• Connectors: 2 x SMA connectors for cellular with diversity and 1 x SMA connector for GPS
• Air Interface: LTE-A Pro (LTE-LAA), HSPA+
• Frequency Bands:4G LTE B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B18, B19, B20, B26, B28, B29, B30, B32, B41, B42, B43, B46, B48, B66 3G HSPA+ B1, B2, B4, B5, B6, B8, B9, B19
• Data Services: Transfer rate (peak): Download 600 Mbps/Upload 150 Mbps CAT-12

• Remote Management
• Remote Monitoring